VTAP100 PAC NFC reader - RS-485/OSDP, compact case
Physical characteristics
Dimensions: 97mm x 49mm x 40mm (3.8in x 1.9in x 1.6in)
Front label: 41mm x 57mm (1.61in x 2.24in) with 2mm (0.08in) radius corners
Power Supply: USB 5V DC (typ. 110mA, max 150mA) or RS485 8V-16V DC
Mounting options: 2 x mounting holes in base plate, 1 x security screw fixing front part
Weight: 86g (3.0oz)
Operating Temperature: -25 to 70°C (-13 to 158°F)
Operating Humidity: 0 to 95% RH non-condensing
NFC Interface
Frequency/standards: 13.56MHz, ISO 14443A/B, ISO 15693 and ISO 18092
Antenna(s): Integrated 40mm (1.57in) square antenna
Read range: Typically 25mm (1in) depending on environment and phone/card/tag antenna
Mobile wallet compatibility:
- Apple Wallet NFC passes (VAS for loyalty/membership/ticketing plus ECP2.0 for Apple Access)
- Google Wallet NFC passes (Smart Tap, extensible, including generic private passes)
- Pass auto-selection, including full ECP1, ECP2 and Express Mode compliance
- Mobile device type detection and inclusion
- Multiple simultaneous pass IDs
- ECC key auto-select
- Apple enrolment URL and Google STUID capture, where supported
Card/tag compatibility:
- MIFARE Ultralight, MIFARE Classic, MIFARE DESFire, ICODE, NFC Forum Types 2,4,5;
- UID/CSN reading as standard on all card types;
- Secure data reading on MIFARE Classic and MIFARE DESFire;
- NDEF record reading on Type 2 & 4 (Ultralight/NTAG and DESFire/HCE)
Other NFC modes: Dynamic tag emulation (text, URI, raw data) with smart write-back
Pass IDs: Up to 6 x Apple merchant IDs and 6 x Google collector IDs, if supported
Encryption key slots: 6 x ECC key slots (for Apple & Google merchant IDs); 6 x Application key slots (DES or AES)
Access control interface
Interface type: RS-485 half-duplex
Protocols: VTAP serial comms (active/passive mode, file transfer); configurable OSDP (basic secure)
Connector: 4-pin 3.5mm removable screw terminal block - combined power and A/B interface lines
Recommended cabling: 24 AWG minimum, multicore shielded
USB
USB device types (can enable/disable as required):
- USB Mass storage (for easy configuration, key loading & firmware updates);
- Human interface device(standard barcode reader/keyboard emulation);
- USB Virtual COM port (includes active, passive and file transfer modes)
Connectors: Micro USB socket or 8-pin captive cable connector for USB (2mm pitch)
Operating system support: Full support on Windows, Linux, OSX; support for keyboard emulation and virtual COM device types on Android; most other operating systems support keyboard emulation
Other features
Operator feedback: Buzzer and RGB LEDs (configurable default colour automatic card and pass read beep/flash)
Field configurable: Yes, using configuration files, and with password and hardware-based lock
Field upgradeable: Yes, using encrypted firmware file and secure bootloader, and factory reset feature
Hardware security: Optional cryptographic co-processor with secure hardware-based key storage
Encryption algorithms: ECDH, NIST P-256, ECDSA, HMAC SHA-256, AES-128 CTR, AES-256 GCMANSI-X9.63-KDF & HKDF according to RFC5869 using HMAC-SHA256
Compliance / Certification
Apple VAS, Google Smart Tap, UKCA, CE, FCC and ISED (pending), RoHS
24-month limited hardware warranty
Manufacturer's part number: VTAP100-PAC-485-CC
Manufacturer: Dot Origin
Connection Method: Other